[CBLX] Re: brltty avec support Iris KB disponible
No� KEH
kehnoel at gmail.com
Dim 24 Fév 20:24:20 CET 2008
Salut Yannick, salut Sébastien, et salut à tout le monde,
merci de vos réponses respectives. J'ai essayé les commandes
suivantes, mais je n'ai toujours aucun affichage sur ma plage IRIS
KB40, version CE 1.80.
Voici les commandes tapées: brltty -d /dev/ttyUSB0 -b eu
J'ai essayé aussi le ttyUSB1 à ttyUSB4 pour le cas où ...
Je publie donc le rapport qui est généré par la commande : dmesg.
[Début]
[ 0.000000] Linux version 2.6.22-14-generic (buildd at palmer) (gcc
version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP
Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7d0000 (usable)
[ 0.000000] BIOS-e820: 000000007f7d0000 - 000000007f7de000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f7de000 - 000000007f800000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 1143MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 522192) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 522192
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 522192
[ 0.000000] On node 0 totalpages: 522192
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2287 pages used for memmap
[ 0.000000] HighMem zone: 290529 pages, LIFO batch:31
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F8970 checksum 0
[ 0.000000] ACPI: RSDP 000F8970, 0014 (r0 MSI_NB)
[ 0.000000] ACPI: RSDT 7F7D0000, 0040 (r1 MSI_NB MEGABOOK 3082007
MSFT 97)
[ 0.000000] ACPI: FACP 7F7D0200, 0084 (r2 MSI_NB MEGABOOK 3082007
MSFT 97)
[ 0.000000] ACPI: DSDT 7F7D05B0, 45AA (r1 MSI_NB MEGABOOK 3082007
INTL 2002026)
[ 0.000000] ACPI: FACS 7F7DE000, 0040
[ 0.000000] ACPI: APIC 7F7D0390, 005C (r1 MSI_NB MEGABOOK 3082007
MSFT 97)
[ 0.000000] ACPI: MCFG 7F7D03F0, 003C (r1 MSI_NB MEGABOOK 3082007
MSFT 97)
[ 0.000000] ACPI: SLIC 7F7D0430, 0176 (r1 MSI_NB MEGABOOK 3082007
MSFT 97)
[ 0.000000] ACPI: OEMB 7F7DE040, 006E (r1 MSI_NB MEGABOOK 3082007
MSFT 97)
[ 0.000000] ACPI: HPET 7F7D4B60, 0038 (r1 MSI_NB MEGABOOK 3082007
MSFT 97)
[ 0.000000] ACPI: ASF! 7F7D4B98, 0075 (r32 LEGEND I865PASF 1
INTL 2002026)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:14 APIC version 20
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 80000000 (gap:
7f800000:7f600000)
[ 0.000000] Built 1 zonelists. Total pages: 518113
[ 0.000000] Kernel command line:
root=UUID=4d0820ac-d430-48f4-9dfe-07ffc27a83fd ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2000.161 MHz processor.
[ 15.428512] Console: colour VGA+ 80x25
[ 15.428798] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 15.429138] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.533461] Memory: 2059404k/2088768k available (2015k kernel code,
28124k reserved, 916k data, 364k init, 1171264k highmem)
[ 15.533469] virtual kernel memory layout:
[ 15.533470] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 15.533471] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 15.533473] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 15.533474] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 15.533475] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 15.533476] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 15.533477] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 15.533480] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 15.533517] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4,
CPUs=2, Nodes=1
[ 15.533644] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 15.533648] hpet0: 3 64-bit timers, 14318180 Hz
[ 15.614508] Calibrating delay using timer specific routine..
4003.28 BogoMIPS (lpj=8006564)
[ 15.614532] Security Framework v1.0.0 initialized
[ 15.614540] SELinux: Disabled at boot.
[ 15.614552] Mount-cache hash table entries: 512
[ 15.614678] CPU: After generic identify, caps: bfe9fbff 00100000
00000000 00000000 0000c189 00000000 00000000
[ 15.614686] monitor/mwait feature present.
[ 15.614688] using mwait in idle threads.
[ 15.614691] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 15.614694] CPU: L2 cache: 2048K
[ 15.614698] CPU: Physical Processor ID: 0
[ 15.614699] CPU: Processor Core ID: 0
[ 15.614701] CPU: After all inits, caps: bfe9fbff 00100000 00000000
00002940 0000c189 00000000 00000000
[ 15.614710] Compat vDSO mapped to ffffe000.
[ 15.614721] Checking 'hlt' instruction... OK.
[ 15.630598] SMP alternatives: switching to UP code
[ 15.631050] Early unpacking initramfs... done
[ 15.921722] ACPI: Core revision 20070126
[ 15.921773] ACPI: Looking for DSDT in initramfs... error, file
/DSDT.aml not found.
[ 15.924066] CPU0: Intel(R) Core(TM) Duo CPU T2450 @ 2.00GHz stepping 0c
[ 15.924081] SMP alternatives: switching to SMP code
[ 15.924207] Booting processor 1/1 eip 3000
[ 15.934437] Initializing CPU#1
[ 16.013734] Calibrating delay using timer specific routine..
4000.20 BogoMIPS (lpj=8000404)
[ 16.013740] CPU: After generic identify, caps: bfe9fbff 00100000
00000000 00000000 0000c189 00000000 00000000
[ 16.013745] monitor/mwait feature present.
[ 16.013748] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 16.013750] CPU: L2 cache: 2048K
[ 16.013752] CPU: Physical Processor ID: 0
[ 16.013753] CPU: Processor Core ID: 1
[ 16.013754] CPU: After all inits, caps: bfe9fbff 00100000 00000000
00002940 0000c189 00000000 00000000
[ 16.014268] CPU1: Intel(R) Core(TM) Duo CPU T2450 @ 2.00GHz stepping 0c
[ 16.014289] Total of 2 processors activated (8003.48 BogoMIPS).
[ 16.014440] ENABLING IO-APIC IRQs
[ 16.014627] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 16.161538] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 16.181515] Brought up 2 CPUs
[ 16.258611] migration_cost=44
[ 16.258746] Booting paravirtualized kernel on bare hardware
[ 16.258816] Time: 18:56:43 Date: 01/24/108
[ 16.258836] NET: Registered protocol family 16
[ 16.258920] EISA bus registered
[ 16.258925] ACPI: bus type pci registered
[ 16.259088] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
[ 16.259090] PCI: Using configuration type 1
[ 16.259091] Setting up standard PCI resources
[ 16.269861] ACPI: EC: Look up EC in DSDT
[ 16.270365] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 16.272159] ACPI: Interpreter enabled
[ 16.272161] ACPI: (supports S0 S1 S3 S4 S5)
[ 16.272177] ACPI: Using IOAPIC for interrupt routing
[ 16.279596] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 16.279689] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 16.279705] PCI: Probing PCI hardware (bus 00)
[ 16.280272] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 16.280277] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 16.280924] PCI: Transparent bridge - 0000:00:1e.0
[ 16.281022] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 16.281175] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 16.281271] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 16.281343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 16.281413] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 16.289559] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 16.289658] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 16.289754] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 16.289849] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 16.289945] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11
12 14 15) *0, disabled.
[ 16.290041] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11
12 14 15) *0, disabled.
[ 16.290140] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11
12 14 15) *0, disabled.
[ 16.290236] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 16.290327] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 16.290339] pnp: PnP ACPI init
[ 16.290346] ACPI: bus type pnp registered
[ 16.291817] pnp: PnP ACPI: found 12 devices
[ 16.291819] ACPI: ACPI bus type pnp unregistered
[ 16.291821] PnPBIOS: Disabled by ACPI PNP
[ 16.291862] PCI: Using ACPI for IRQ routing
[ 16.291864] PCI: If a device doesn't work, try "pci=routeirq". If
it helps, post a report
[ 16.304561] NET: Registered protocol family 8
[ 16.304563] NET: Registered protocol family 20
[ 16.304607] pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 16.304615] pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 16.304617] pnp: 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 16.304620] pnp: 00:08: iomem range 0xfff80000-0xffffffff could not
be reserved
[ 16.304625] pnp: 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 16.304628] pnp: 00:09: iomem range 0xfee00000-0xfee00fff could not
be reserved
[ 16.304632] pnp: 00:0a: iomem range 0xe0000000-0xe3ffffff has been reserved
[ 16.304638] pnp: 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 16.304641] pnp: 00:0b: iomem range 0xc0000-0xcffff could not be reserved
[ 16.304643] pnp: 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[ 16.304646] pnp: 00:0b: iomem range 0x100000-0x7f7fffff could not be reserved
[ 16.305177] Time: tsc clocksource has been installed.
[ 16.305190] Switched to high resolution mode on CPU 0
[ 16.305273] Switched to high resolution mode on CPU 1
[ 16.334846] PCI: Bridge: 0000:00:1c.0
[ 16.334848] IO window: e000-efff
[ 16.334853] MEM window: fc000000-febfffff
[ 16.334857] PREFETCH window: f4000000-faffffff
[ 16.334862] PCI: Bridge: 0000:00:1c.1
[ 16.334864] IO window: d000-dfff
[ 16.334869] MEM window: fbf00000-fbffffff
[ 16.334872] PREFETCH window: disabled.
[ 16.334877] PCI: Bridge: 0000:00:1c.2
[ 16.334878] IO window: disabled.
[ 16.334882] MEM window: disabled.
[ 16.334885] PREFETCH window: disabled.
[ 16.334896] PCI: Bus 2, cardbus bridge: 0000:01:04.0
[ 16.334898] IO window: 0000c000-0000c0ff
[ 16.334903] IO window: 0000c400-0000c4ff
[ 16.334907] PREFETCH window: 80000000-83ffffff
[ 16.334911] MEM window: 84000000-87ffffff
[ 16.334915] PCI: Bridge: 0000:00:1e.0
[ 16.334918] IO window: c000-cfff
[ 16.334922] MEM window: fb600000-fbefffff
[ 16.334926] PREFETCH window: f2000000-f3ffffff
[ 16.334948] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 16.334954] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 16.334971] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level,
low) -> IRQ 17
[ 16.334976] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 16.334993] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level,
low) -> IRQ 18
[ 16.334998] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 16.335008] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 16.335020] ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 16.335032] NET: Registered protocol family 2
[ 16.385015] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 16.385073] TCP established hash table entries: 131072 (order: 8,
1572864 bytes)
[ 16.386015] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 16.386377] TCP: Hash tables configured (established 131072 bind 65536)
[ 16.386379] TCP reno registered
[ 16.401098] checking if image is initramfs... it is
[ 16.978389] Freeing initrd memory: 7065k freed
[ 16.978992] audit: initializing netlink socket (disabled)
[ 16.979008] audit(1203879404.148:1): initialized
[ 16.979098] highmem bounce pool size: 64 pages
[ 16.980946] VFS: Disk quotas dquot_6.5.1
[ 16.980991] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 16.981077] io scheduler noop registered
[ 16.981079] io scheduler anticipatory registered
[ 16.981081] io scheduler deadline registered
[ 16.981095] io scheduler cfq registered (default)
[ 16.981109] Boot video device is 0000:00:02.0
[ 16.981255] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 16.981296] assign_interrupt_mode Found MSI capability
[ 16.981299] Allocate Port Service[0000:00:1c.0:pcie00]
[ 16.981381] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 16.981420] assign_interrupt_mode Found MSI capability
[ 16.981422] Allocate Port Service[0000:00:1c.1:pcie00]
[ 16.981451] Allocate Port Service[0000:00:1c.1:pcie02]
[ 16.981525] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 16.981564] assign_interrupt_mode Found MSI capability
[ 16.981566] Allocate Port Service[0000:00:1c.2:pcie00]
[ 16.981599] Allocate Port Service[0000:00:1c.2:pcie02]
[ 16.981735] isapnp: Scanning for PnP cards...
[ 17.334171] isapnp: No Plug & Play device found
[ 17.356397] Real Time Clock Driver v1.12ac
[ 17.356511] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports,
IRQ sharing enabled
[ 17.357533] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 17.357657] input: Macintosh mouse button emulation as /class/input/input0
[ 17.357728] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
0x60,0x64 irq 1,12
[ 17.358047] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 17.358106] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 17.358112] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 17.358116] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 17.358118] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 17.358120] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 17.358239] mice: PS/2 mouse device common for all mice
[ 17.358369] EISA: Probing bus 0 at eisa.0
[ 17.358398] EISA: Detected 0 cards.
[ 17.358487] TCP cubic registered
[ 17.358502] NET: Registered protocol family 1
[ 17.358523] Using IPI No-Shortcut mode
[ 17.358709] Magic number: 12:578:949
[ 17.358720] hash matches device ttya4
[ 17.358830] hash matches device tty6
[ 17.359050] Freeing unused kernel memory: 364k freed
[ 17.361931] input: AT Translated Set 2 keyboard as /class/input/input1
[ 18.532456] AppArmor: AppArmor
initialized<5>audit(1203879405.648:2): type=1505 info="AppArmor
initialized" pid=1232
[ 18.537422] fuse init (API version 7.8)
[ 18.542107] Failure registering capabilities with primary security module.
[ 18.576364] ACPI: SSDT 7F7D4C10, 0444 (r1 AMI CPU1PM 1
INTL 20051117)
[ 18.576611] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 18.576653] ACPI Warning (tbutils-0217): Incorrect checksum in
table [SSDT] - 63, should be E1 [20070126]
[ 18.576658] ACPI: SSDT 7F7D5060, 0444 (r1 AMI CPU2PM 1
INTL 20051117)
[ 18.576882] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 18.579465] ACPI: Thermal Zone [THRM] (50 C)
[ 2.940000] Marking TSC unstable due to: possible TSC halt in C2.
[ 2.944000] Time: hpet clocksource has been installed.
[ 3.284000] usbcore: registered new interface driver usbfs
[ 3.284000] usbcore: registered new interface driver hub
[ 3.284000] usbcore: registered new device driver usb
[ 3.284000] USB Universal Host Controller Interface driver v3.0
[ 3.284000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level,
low) -> IRQ 19
[ 3.284000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.284000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.288000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 1
[ 3.288000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000b480
[ 3.288000] usb usb1: configuration #1 chosen from 1 choice
[ 3.288000] hub 1-0:1.0: USB hub found
[ 3.288000] hub 1-0:1.0: 2 ports detected
[ 3.392000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level,
low) -> IRQ 20
[ 3.392000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.392000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.392000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 2
[ 3.392000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000b800
[ 3.392000] usb usb2: configuration #1 chosen from 1 choice
[ 3.392000] hub 2-0:1.0: USB hub found
[ 3.392000] hub 2-0:1.0: 2 ports detected
[ 3.400000] SCSI subsystem initialized
[ 3.404000] libata version 2.21 loaded.
[ 3.496000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level,
low) -> IRQ 18
[ 3.496000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.496000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.496000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 3
[ 3.496000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880
[ 3.496000] usb usb3: configuration #1 chosen from 1 choice
[ 3.496000] hub 3-0:1.0: USB hub found
[ 3.496000] hub 3-0:1.0: 2 ports detected
[ 3.600000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level,
low) -> IRQ 16
[ 3.600000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.600000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.600000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 4
[ 3.600000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
[ 3.600000] usb usb4: configuration #1 chosen from 1 choice
[ 3.600000] hub 4-0:1.0: USB hub found
[ 3.600000] hub 4-0:1.0: 2 ports detected
[ 3.632000] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 3.704000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level,
low) -> IRQ 19
[ 3.704000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.704000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.704000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 5
[ 3.704000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.704000] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[ 3.704000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfb5ffc00
[ 3.748000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
[ 3.748000] usb usb5: configuration #1 chosen from 1 choice
[ 3.748000] hub 5-0:1.0: USB hub found
[ 3.748000] hub 5-0:1.0: 8 ports detected
[ 3.852000] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 3.852000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level,
low) -> IRQ 17
[ 3.852000] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 3.852000] eth0: RTL8168b/8111b at 0xf8858000, 00:19:db:ed:7d:3f,
XID 38000000 IRQ 17
[ 3.852000] ACPI: PCI Interrupt 0000:01:04.4[A] -> GSI 16 (level,
low) -> IRQ 16
[ 3.904000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]
MMIO=[fb6ff000-fb6ff7ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 3.908000] ata_piix 0000:00:1f.2: version 2.11
[ 3.908000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 3.908000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level,
low) -> IRQ 20
[ 3.908000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 3.908000] scsi0 : ata_piix
[ 3.908000] scsi1 : ata_piix
[ 3.908000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6
bmdma 0x0001ffa0 irq 14
[ 3.908000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376
bmdma 0x0001ffa8 irq 15
[ 4.124000] ata1.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133
[ 4.124000] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.140000] ata1.00: configured for UDMA/133
[ 4.156000] usb 1-2: device not accepting address 2, error -71
[ 4.480000] ata2.01: ATAPI: Optiarc DVD RW AD-7530B, NX02, max UDMA/33
[ 4.652000] ata2.01: configured for UDMA/33
[ 4.652000] scsi 0:0:0:0: Direct-Access ATA WDC
WD2500BEVS-2 01.0 PQ: 0 ANSI: 5
[ 4.652000] scsi 1:0:1:0: CD-ROM Optiarc DVD RW
AD-7530B NX02 PQ: 0 ANSI: 5
[ 4.660000] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 4.660000] sd 0:0:0:0: [sda] Write Protect is off
[ 4.660000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.660000] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.660000] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 4.660000] sd 0:0:0:0: [sda] Write Protect is off
[ 4.660000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.660000] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.660000] sda: sda1 sda2 sda3 < sda5 > sda4
[ 4.736000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.740000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.744000] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 4.744000] usb 5-2: new high speed USB device using ehci_hcd and address 2
[ 4.756000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 4.756000] Uniform CD-ROM driver Revision: 3.20
[ 4.756000] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 4.880000] usb 5-2: configuration #1 chosen from 1 choice
[ 5.048000] Attempting manual resume
[ 5.048000] swsusp: Resume From Partition 8:5
[ 5.048000] PM: Checking swsusp image.
[ 5.048000] PM: Resume from disk failed.
[ 5.080000] kjournald starting. Commit interval 5 seconds
[ 5.080000] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.176000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00dc100052393201]
[ 5.364000] usb 5-6: new high speed USB device using ehci_hcd and address 4
[ 5.632000] usb 5-6: configuration #1 chosen from 1 choice
[ 5.872000] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 6.032000] usb 3-1: configuration #1 chosen from 1 choice
[ 11.024000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 11.024000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.296000] intel_rng: FWH not detected
[ 11.308000] Linux agpgart interface v0.102 (c) Dave Jones
[ 11.308000] agpgart: Detected an Intel 945GM Chipset.
[ 11.308000] agpgart: Detected 7932K stolen memory.
[ 11.332000] input: PC Speaker as /class/input/input2
[ 11.400000] agpgart: AGP aperture is 256M @ 0xd0000000
[ 11.400000] Yenta: CardBus bridge found at 0000:01:04.0 [1462:42e1]
[ 11.400000] Yenta O2: res at 0x94/0xD4: 00/ea
[ 11.400000] Yenta O2: enabling read prefetch/write burst
[ 11.424000] iTCO_vendor_support: vendor-support=0
[ 11.448000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 11.456000] sdhci: Secure Digital Host Controller Interface driver
[ 11.456000] sdhci: Copyright(c) Pierre Ossman
[ 11.512000] usbcore: registered new interface driver usbserial
[ 11.512000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c:
USB Serial support registered for generic
[ 11.512000] usbcore: registered new interface driver usbserial_generic
[ 11.512000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c:
USB Serial Driver core
[ 11.528000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
[ 11.528000] Socket status: 30000006
[ 11.528000] pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
[ 11.528000] cs: IO port probe 0xc000-0xcfff: clean.
[ 11.528000] pcmcia: parent PCI bridge Memory window: 0xfb600000 - 0xfbefffff
[ 11.528000] pcmcia: parent PCI bridge Memory window: 0xf2000000 - 0xf3ffffff
[ 11.528000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c:
USB Serial support registered for pl2303
[ 11.528000] pl2303 3-1:1.0: pl2303 converter detected
[ 11.528000] usb 3-1: pl2303 converter now attached to ttyUSB0
[ 11.528000] usbcore: registered new interface driver pl2303
[ 11.528000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/pl2303.c:
Prolific PL2303 USB to serial adaptor driver
[ 11.536000] sdhci: SDHCI controller found at 0000:01:04.2 [1217:7120] (rev 1)
[ 11.536000] ACPI: PCI Interrupt 0000:01:04.2[A] -> GSI 16 (level,
low) -> IRQ 16
[ 11.536000] sdhci:slot0: Unknown controller version (16). You may
experience problems.
[ 11.536000] mmc0: SDHCI at 0xfb6fe400 irq 16 PIO
[ 11.768000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 11.768000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 11.852000] cs: IO port probe 0x100-0x3af: clean.
[ 11.856000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 11.856000] cs: IO port probe 0x820-0x8ff: clean.
[ 11.856000] cs: IO port probe 0xc00-0xcf7: clean.
[ 11.856000] cs: IO port probe 0xa00-0xaff: clean.
[ 11.876000] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
[ 11.876000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0860)
[ 11.876000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.984000] hda_codec: Unknown model for ALC883, trying auto-probe
from BIOS...
[ 12.084000] ieee80211_init: failed to initialize WME (err=-17)
[ 12.108000] iwlwifi_rc80211_simple: Unknown symbol
iwlwifi_ieee80211_rate_control_unregister
[ 12.108000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_put
[ 12.108000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_get
[ 12.108000] iwlwifi_rc80211_simple: Unknown symbol
iwlwifi_ieee80211_rate_control_register
[ 12.108000] wmaster0: Selected rate control algorithm 'simple'
[ 12.184000] usbcore: registered new interface driver rt73usb
[ 12.416000] loop: module loaded
[ 12.456000] lp: driver loaded but no devices found
[ 12.536000] Adding 6056464k swap on /dev/sda5. Priority:-1
extents:1 across:6056464k
[ 12.868000] EXT3 FS on sda2, internal journal
[ 13.980000] hda_intel: azx_get_response timeout, switching to polling mode...
[ 14.220000] ACPI: AC Adapter [ADP1] (on-line)
[ 14.228000] ACPI: Video Device [IGFX] (multi-head: yes rom: no post: no)
[ 14.236000] No dock devices found.
[ 14.388000] input: Power Button (FF) as /class/input/input4
[ 14.388000] ACPI: Power Button (FF) [PWRF]
[ 14.388000] input: Power Button (CM) as /class/input/input5
[ 14.388000] ACPI: Power Button (CM) [PWRB]
[ 14.388000] input: Lid Switch as /class/input/input6
[ 14.388000] ACPI: Lid Switch [LID0]
[ 14.388000] input: Sleep Button (CM) as /class/input/input7
[ 14.388000] ACPI: Sleep Button (CM) [SLPB]
[ 14.472000] ACPI: Battery Slot [BAT1] (battery present)
[ 15.380000] ppdev: user-space parallel port driver
[ 15.504000] audit(1203875818.097:3): type=1503
operation="inode_permission" requested_mask="a" denied_mask="a"
name="/dev/tty" pid=5032 profile="/usr/sbin/cupsd"
[ 15.556000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 15.556000] apm: disabled - APM is not SMP safe.
[ 15.676000] r8169: eth0: link down
[ 16.008000] Failure registering capabilities with primary security module.
[ 16.216000] Bluetooth: Core ver 2.11
[ 16.216000] NET: Registered protocol family 31
[ 16.216000] Bluetooth: HCI device and connection manager initialized
[ 16.216000] Bluetooth: HCI socket layer initialized
[ 16.232000] Bluetooth: L2CAP ver 2.8
[ 16.232000] Bluetooth: L2CAP socket layer initialized
[ 16.288000] Bluetooth: RFCOMM socket layer initialized
[ 16.288000] Bluetooth: RFCOMM TTY layer initialized
[ 16.288000] Bluetooth: RFCOMM ver 1.8
[ 21.344000] [drm] Initialized drm 1.1.0 20060810
[ 21.344000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 21.344000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[Fin]
Je vous remercie d'avance de vos conseils et observations.
Noël
Le 18/02/08, Sébastien Hinderer<Sebastien.Hinderer at ens-lyon.org> a écrit :
> Bonsoir Noël,
>
> > ce n'est pas par ingratitude que je n'ai pas réagi depuis la
> > publication de ton mail. J'attendais d'essayer le driver avant.
>
> Excellente idée, merci.
>
> > J'ai bien téléchargé le fichier indiqué pour l'iris kb40. Lorsque nous
> > tapons : sudo tar -xzvf nomfichier.tar.gz, nous avons l'impression que
> > les fichiers sont décompressés directement dans leurs différents
> > répertoires respectifs.
>
> C'est ça. Le fichier .tar.gz était fait exprès pour être le plus simple
> possibl à utiliser.
>
> > Et quand on tape ensuite la commande "brltty",
> > on a bien la version qui s'affiche, mais je n'ai toujours rien sur la
> > plage braille.
>
> Yannick a raison: si vous utilisez un adaptateur USB-série, la commande
> suivante devrait fonctionner
> brltty -d /dev/ttyUSB0
> Pas besoin de mettre le -eu car le brltty de l'archive que vous avez
> récupérée ne contient que le pilote eurobraille.
>
> > En tout cas, je trouve formidable de pouvoir mettre au point un driver
> > dès que cela est nécessaire.
>
> Cela aurait dû être fait depuis longtemps. Votre demande a permis de
> passer enfin à l'action.
>
> Sébastien.
> _______________________________________________
> Liste de diffusion CarrefourBLinuX
> CarrefourBLinuX at lists.freearchive.org
> http://lists.freearchive.org/mailman/listinfo/carrefourblinux
> Fiches EDU : http://blinuxwiki.pbwiki.com/FichesEdu
> Signets : http://fr.groups.yahoo.com/group/carrefourblinux/links/
> Archives : http://lists.freearchive.org/pipermail//carrefourblinux
> Anciennes archives (Yahoogroupes) :
> http://fr.groups.yahoo.com/group/carrefourblinux/messages
> Rechercher : http://lists.freearchive.org/cgi-bin/search.cgi
> Pour s'inscire par courriel :
> 'mailto:carrefourblinux-request at lists.freearchive.org?subject=subscribe'
> Pour se desinscrire par courriel :
>
> 'mailto:carrefourblinux-request at lists.freearchive.org?subject=unsubscribe'
>
--
KEH Noël
61Bis rue de la Gemmetrie
49124 Saint Barthélemy d'Anjou
. 02 41 33 91 16
. 06 88 68 43 66
Plus d'informations sur la liste de diffusion CarrefourBLinuX